|
|
| Line 1: |
Line 1: |
| | [[Equipment|Equipment]] / [[Equipment/CNC_Router|CNC Router]] / Hand Controller | | [[Equipment|Equipment]] / [[Equipment/CNC_Router|CNC Router]] / Hand Controller |
| | | | |
| − | = CNC Router Hand Controller Guide=
| + | We have a new controller as of February 22nd, 2019. Thank you to Michael Dales and Adrian van den Heever who installed it. |
| | | | |
| | + | Please read the [https://www.nvcnc.net/pdf/NVCNC_DM500.pdf User's manual (PDF)] for all the information. |
| | | | |
| − | The purpose of this page is to act as a guide for those who are not yet fully familiar with all the functions or key commands that operate the CNC Router. The tables below can be used while operating the machine as a quick "look-up" guide.
| + | Most settings are similar to the old router ([http://wiki.makespace.org/File:MPC6610_CNC_Router_Manual_v1.0-En.pdf User's manual]). The most important instruction is how to stop a job in an emergency: touch the yellow button with "PAUSE" at the bottom. |
| − | | + | |
| − | For more in depth reading, the Router Manual can be found here in PDF form. [http://wiki.makespace.org/File:MPC6610_CNC_Router_Manual_v1.0-En.pdf Router Manual]
| + | |
| − | | + | |
| − | | + | |
| − | = Lookup Tables =
| + | |
| − | | + | |
| − | Hand controller layout.
| + | |
| − | | + | |
| − | [[Image:Keypad.png|300px]]
| + | |
| − | | + | |
| − | == Startup ==
| + | |
| − | | + | |
| − | Turn machine on at the plug socket/switch. Press 'OK' when controller says 'DATUM'
| + | |
| − | | + | |
| − | [[image:Router-menu-datum.png|200px]]
| + | |
| − | | + | |
| − | [[image:Router-OK.png|50px]] The gantry will move the spindle/cutter to the front left of the bed. This is the XY Datum position.
| + | |
| − | | + | |
| − | <!-- breaks below to improve printing onto paper :) -->
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | | + | |
| − | == Movement ==
| + | |
| − | | + | |
| − | Looking at the machine from the front.
| + | |
| − | | + | |
| − | [[image:Router-4.png|50px]]
| + | |
| − | Move left:
| + | |
| − | | + | |
| − | [[image:Router-1.png|50px]]
| + | |
| − | Move right:
| + | |
| − | | + | |
| − | [[image:Router-5.png|50px]]
| + | |
| − | Move Back (away):
| + | |
| − | | + | |
| − | [[image:Router-2.png|50px]]
| + | |
| − | Move Forward (towards):
| + | |
| − | | + | |
| − | [[image:Router-6.png|50px]]
| + | |
| − | Move Up:
| + | |
| − | | + | |
| − | [[image:Router-3.png|50px]]
| + | |
| − | Move Down:
| + | |
| − | | + | |
| − | == Zeroing ==
| + | |
| − | | + | |
| − | [[Image:Router-7.png|50px]]
| + | |
| − | Set the X-Y home: 7
| + | |
| − | | + | |
| − | [[Image:Router-8.png|50px]]
| + | |
| − | Set the Z home to the current position: 8
| + | |
| − | | + | |
| − | [[image:Router-OK.png|50px]] + [[Image:Router-8.png|50px]]
| + | |
| − | Set the Z home to the top of material using sensor: OK + 8
| + | |
| − | | + | |
| − | [[image:Router-OK.png|50px]] + [[Image:Router-origin.png|50px]]
| + | |
| − | Move to workspace origin: OK + Origin
| + | |
| − | | + | |
| − | <!-- br tags to help printing onto paper -->
| + | |
| − | | + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | <br>
| + | |
| − | | + | |
| − | == Loading & Starting a Job ==
| + | |
| − | | + | |
| − | Run Job from USB:
| + | |
| − | | + | |
| − | [[image:router-run.png]] Press Run/Pause
| + | |
| − | | + | |
| − | [[image:Router-menu-udisk.png|200px]]
| + | |
| − | | + | |
| − | [[image:router-OK.png|50px]] Select 'U-Disk File' by pressing 'OK'
| + | |
| − | | + | |
| − | [[image:Router-menu-files.png|200px]] Use 1 & 4 to move up and down item by item, 2 & 5 to move page by page. OK to select.
| + | |
| − | | + | |
| − | <!--[[image:router-OK.png|50px]]-->
| + | |
| − | | + | |
| − | [[image:Router-menu-speed.png|200px]] Change work speed (feed rate): Use 1 & 4 to select Work Spd.
| + | |
| − | | + | |
| − | Origin to edit [[image:router-origin.png|50px]] Enter speed then press OK [[image:router-OK.png|50px]]
| + | |
| − | | + | |
| − | [[image:Router-menu-spdrate.png|200px]] Set Speed ratio: Use 1 & 4 to select Spd Rate.
| + | |
| − | | + | |
| − | Origin to edit [[image:router-origin.png|50px]] Enter Percentage of Work Speed then press OK [[image:router-OK.png|50px]]
| + | |
| − | | + | |
| − | [[image:router-run.png]]
| + | |
| − | Start Job:
| + | |
| − | | + | |
| − | == Speed Control ==
| + | |
| − | | + | |
| − | [[image:Router-highlow.png]]
| + | |
| − | Change the rapid speed when manually moving the tool: High/Low
| + | |
| − | | + | |
| − | [[image:Router-shiftup.png]]
| + | |
| − | Increase the feed rate while job is running: Shift-Up
| + | |
| − | | + | |
| − | [[image:Router-shiftdown.png]]
| + | |
| − | Decrease the feed rate while job is running: Shift-Down
| + | |
| − | | + | |
| − | == Emergency Situation ==
| + | |
| − | | + | |
| − | [[image:router-run.png]]
| + | |
| − | Pause: Run/Pause
| + | |
| − | | + | |
| − | [[image:router-run.png]]
| + | |
| − | Resume from pause: Run/Pause
| + | |
| − | | + | |
| − | [[image:router-stop.png|50px]] [[image:router-stop.png|50px]]
| + | |
| − | Stop current job: Stop Stop - Press 'Stop' twice!
| + | |
We have a new controller as of February 22nd, 2019. Thank you to Michael Dales and Adrian van den Heever who installed it.
