Difference between revisions of "Equipment/VacuumFormer/RiskAssessment"
Perfectphase (Talk | contribs) |
Perfectphase (Talk | contribs) (→Hazard identification) |
||
| Line 7: | Line 7: | ||
''Consider the hazards involved in conducting this activity and list each hazard'' | ''Consider the hazards involved in conducting this activity and list each hazard'' | ||
1. Fire | 1. Fire | ||
| + | |||
2. Burns | 2. Burns | ||
| − | 3. Electric Shock | + | |
| + | 3. Electric Shock | ||
===Persons at risk=== | ===Persons at risk=== | ||
Revision as of 21:56, 24 July 2013
Contents
Risk assessment form for Vacuum Former
Activity
Vacuum forming plastic material
Hazard identification
Consider the hazards involved in conducting this activity and list each hazard 1. Fire
2. Burns
3. Electric Shock
Persons at risk
Consider who might be put at risk by the hazards listed above
- The user is subject to 1, 2 and 3.
- The space and all occupants are subject to 1.
Initial assessment of risk
| Hazard identified | Severity | Probability | Risk Factor (Severity x probability) |
|---|---|---|---|
| Hazard 1 | 5 | 2 | 10 |
| Hazard 2 | 3 | 3 | 9 |
| Hazard 3 | 4 | 2 | 8 |
Categorising the risk level as 1-4(Low), 5-9(Moderate), 10-15(High) or 16-25 (Unacceptable) shows that the potential level of risk in this activity is High. Further measures are needed/not needed to reduce the risk to an acceptable level.
Control measures
- Necessary control measures arising from the hazard identified of Fire are:
- Necessary control measures arising from the hazard identified of Burns are:
- Always use handles, do not touch the hood.
- Always wait a couple of minutes before touching the plastic.
- Never put your hand between the plastic and the heater elements.
- Necessary control measures arising from the hazard identified of Electric Shock are:
- Carry out a visual check and check the test date before use.
Final assessment of risk
The assessed risk taking into account the implementation of the control measures listed, and adherence to the SSOW (Safe System of Work) if applicable is as follows:
| Hazard identified | Severity | Probability | Risk Factor |
|---|---|---|---|
| Hazard 1 | 1 | 1 | 1 (Low) |
| Hazard 2 | 1 | 1 | 1 (Low) |
| Hazard 3 | 4 | 1 | 4 (Low) |
When completing Risk Assessment please consider the if First Aid assistance might be appropriate if the calculated Risk level (Severity x Probability) is greater than 5
The risk now falls into the category LOW and is considered to be acceptable.
Authorised by
Sign:
Print:
Date:
