Equipment/WarcoMill/Training
Contents
Training
THE MILL CAN CAUSE SERIOUS INJURY. ONLY APPROVED OPERATORS ARE PERMITTED TO USE IT.
Training and induction will start with a tour of the tool introducing all its parts. The training we give is a course of about 10 hours, in several sessions, and is intended to get a user started with enough information to work safely alone in aluminium and brass.
As well as the training we give, this series of metal working videos from MIT is highly recommended. Episode 1 covers measuring and marking work, 2 covers band sawing and 3 covers drilling. Episodes 4 to 7 cover milling and 8 is about lathe work. Introduction to Machine Shop Tools and Skills
Owners
- Mat Cook
- Diana Probst
- Roger Smith
Trainers
- Diana Probst
- Mat Cook
- Jonathan Waite
Trained Users
Training is an initial guide to the mill and safety briefing, followed by a number of individual lessons interspersed with practicing what has been learned.
| User | Trained level | Mill access |
|---|---|---|
| Diana Probst | Intro | Use while supervised |
| Stevan Wing | Intro | Use while supervised |
| Jonathan Waite | Initial Guide and Lesson A (revision) | Use while supervised |
| Matthew Taylor | Initial Guide and Lesson A | Continued teaching |
| Steve O | Initial Guide and Lessons A - C (conversion) | Continued teaching |
| John Sturdy* | Initial Guide and Lessons A - C | Continued teaching |
| Robert Karpinski* | Initial Guide | Continued teaching |
- indicates user has read and signed safe use document
