Shiny New LatheMillStuff

From Makespace
Revision as of 13:26, 23 December 2014 by DianaProbst (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

From here: [1]

  • Mill
    • Slitting saw stuff (approx £50-60 including a few blades) (I believe we already have these. DP)
  • Mill
    • got! Slideway Lubricant Oil £6.90
    • got! Edge Finder £7.50
    • got! Drill Chuck Type : Key - B16 3-16mm £25.53
    • got! Drill Chuck Type : Key - B16 1-13mm (receipt to process)
    • got! Arbor Type : 3MT B16 £5.11 (drill 1)
    • got! Arbor Type : 3MT B16 (drill 2) (receipt to process)
    • got! Direct collets [3,5,8,10mm]
    • got! 18mm combi spanner (receipt to process)
    • got! Belts for mill (c £13 each, receipts to process)
  • Lathe
    • got! Live / Revolving Centres to fit lathe 2MT £23.49
    • got! New dead centre
  • Misc
    • got! Weighing scale for the honesty box (receipt to process)
    • got! Second metal "overflow" honesty box to live in office (receipt to process)
    • got! New paintbrushes to clean up (receipt to process)
    • never arrived: green tape for tools

Suggested: Zeus Book

Retrieved from "http://wiki.makespace.org/index.php?title=Shiny_New_LatheMillStuff&oldid=27849"