Difference between revisions of "Shiny New LatheMillStuff"
From Makespace
DianaProbst (Talk | contribs) |
DianaProbst (Talk | contribs) |
||
| Line 14: | Line 14: | ||
**got! Arbor Type : 3MT B16 (drill 2) (receipt to process) | **got! Arbor Type : 3MT B16 (drill 2) (receipt to process) | ||
**got! Direct collets [3,5,8,10mm] | **got! Direct collets [3,5,8,10mm] | ||
| + | **ordered: 18mm combi spanner | ||
*Lathe | *Lathe | ||
| Line 20: | Line 21: | ||
*Misc | *Misc | ||
| − | **Weighing scale for the honesty box. | + | **ordered: Weighing scale for the honesty box. |
| − | **Second metal "overflow" honesty box to live in office | + | **ordered: Second metal "overflow" honesty box to live in office |
| − | **New paintbrushes to clean up | + | **ordered: New paintbrushes to clean up |
| − | **green tape for it. | + | **ordered: green tape for it. |
Revision as of 22:02, 2 December 2014
From here: [1]
- Mill
- Slitting saw stuff (approx £50-60 including a few blades) (I believe we already have these. DP)
- Belts for mill (can't find on their site, but they must do them) [Roger says use a reputable name. He is unimpressed by the current ones. brammer has them at c. £5-£8 as catalogue items. DP]
- Mill
- got! Slideway Lubricant Oil £6.90
- got! Edge Finder £7.50
- got! Drill Chuck Type : Key - B16 3-16mm £25.53
- got! Drill Chuck Type : Key - B16 1-13mm (receipt to process)
- got! Arbor Type : 3MT B16 £5.11 (drill 1)
- got! Arbor Type : 3MT B16 (drill 2) (receipt to process)
- got! Direct collets [3,5,8,10mm]
- ordered: 18mm combi spanner
- Lathe
- got! Live / Revolving Centres to fit lathe 2MT £23.49
- got! New dead centre
- Misc
- ordered: Weighing scale for the honesty box.
- ordered: Second metal "overflow" honesty box to live in office
- ordered: New paintbrushes to clean up
- ordered: green tape for it.
