Difference between revisions of "Equipment/Laser Cutter"

From Makespace
Jump to: navigation, search
(Health and Safety)
 
(183 intermediate revisions by 34 users not shown)
Line 1: Line 1:
[[File:Makespace-laser-cutter.JPG|thumb|500px|none]]
 
  
== Summary ==
+
{{RedTool}}
  
== Training ==
+
[[Equipment|Equipment]] / Laser Cutter
 +
 
 +
'''Introduction'''
 +
 
 +
The laser cutters are a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. <br /> <br />'''You must only use the laser cutter if you have had the [https://web.makespace.org/training/ Makespace training], and if you are ever in any doubt about something, please ask for assistance.'''<br /><br />
 +
 
 +
We have two 60w CO2 Water Cooled Laser Cutters. Each has a working area of 900mm by 600mm. You can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.
 +
 
 +
We have dedicated PCs running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.
  
 
== Instructions ==
 
== Instructions ==
  
'''First draft to be expanded - please read the paper copy manual'''
+
''' These instructions are not a substitute for this training, you must have completed the <span style="color:red">Makespace Laser Cutter Training</span> and have had your name added to the trained user list.'''
  
'''The laser cutter must only be operated by members who have received appropriate training'''
+
[[https://docs.google.com/presentation/d/1yM3OCXWbIayMMxw82Zjjc_xhthy-j0b86NiDUe0ccYw/edit#slide=id.p Laser Cutter Software Instructions from the classroom]
  
'''Powering up'''
+
'''Power Up'''
  
 +
Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth. Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.
  
First give the machine a quick visual check. Make sure that there is nothing left on the bed and that the equipment has no obvious damage. Make sure the lid is closed. Turn the key on the right hand side to 'On'. This will set the cutter into doing its self-checks and also automatically start the cooling water feed pump. The air filtering system on the right hand side of the machine has its own 'on' button which should also be turned on. While the machine warms up power up the adjacent PC. This is running XP. The laser cutter application is obvious on the desktop.
+
'''Load your Design'''
  
 +
The PC software has an import facility ('''file > import''') which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the work area in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed. <br>
 +
<span style="color:red">'''The PC's now each have a PIN, which you can find on stickers the desk under the keyboard and on the wall near the top right of the computer screen'''.</span>
  
'''Setting the focus'''
+
'''Prep'''
  
 +
Select all (mouse-drag around all, or ctrl-a) and Tools -> Unite Lines.  You always want to do this.  Without it, many things won't work (will take longer, you'll get gaps, it won't do inner-before-outer, etching areas won't work, etc).
  
If the mirror adjustment has been completed the only adjustment on the machine is the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. Failure to set the distance correctly will result in an out of focus laser and much bigger (put lower powered) cut line.
+
Make sure all your design fits within the bed. Even in immediate (relative) mode, you still need to do this.
  
 +
'''LaserCut 5.3 tips'''<br> If you're stuck in "draw a box" mode, etc. you can right click and hit "pick" to get your pointer back
  
'''loading your drawing'''
+
'''Assign Settings to Colours'''
  
 +
Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.
  
The PC software has an import facility which seems to be happy taking AutoCAD 2004 DXF files and other formats. The scaling seems to be a bit funny so drawing a known size rectangle around your drawing helps check it has things correct. If the import doesn't do what you want size-wise you can then select the whole image and the use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion. Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machines cutting bed.
+
The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the '''Power and Speed Settings''' section for our guidelines and experiences for these settings.
  
 +
Parts are cut "inside out" within a colour, so if you have a hole cutout in a small piece you don't need to give this a separate colour.
  
'''assigning actions to colours'''
+
'''Download to the Cutter'''
  
 +
Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner (can be changed in the menu). In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace. 
  
Your drawing will show on the screen in various colours. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. In due time we will try to build up a sample stock of materials and record the values which work best. For example the book suggested a speed of 10 for 3mm MDF which on one sample was so slow it burned a massively thick line, 40 ended up as a better speed.
+
To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.
  
 +
'''Set the Focus'''
  
'''Download the file to the cutter'''
+
Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.
  
 +
'''Aligning and Testing the Job'''
  
The download option will by default call the file on the laser cutter 'LASER'.  
+
The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.
  
 +
'''Cut the Job'''
  
'''Aligning the job on the cutter'''
+
When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.
  
 +
<span style="color:red">'''DO NOT EVER LEAVE THE CUTTER UNATTENDED'''</span>
  
Your drawing will feature a blue dot which represents the starting point of the laser, this is by default on the top right corner. The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, opening the lid, moving the work place, closing the lid, test, until you have things where you want them.
+
'''Finishing'''
  
 +
The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.
  
'''cutting the work'''
+
'''Power Down'''
  
 +
The cutter is turned off using your fob.
  
When happy with the location of the material press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in you work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.  
+
'''Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.'''
  
'''DO NOT LEAVE THE CUTTER UNATTENDED'''
+
If you have been cutting particularly 'dirty' materials, most notably Ply which leaves a sticky residue then you will need WonderWipes and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.
  
 +
Go away excited by what you can make and come back with lots more drawings!
  
'''finishing'''
+
== Can I cut it? ==
  
 +
If it's not on this list, the answer is "NO YOU CAN'T CUT IT AT MAKESPACE".  Even if other people say it's ok.  Bear in mind that we can't ventilate externally like other people can.
  
The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.
+
If it's something that isn't covered here, do ask on the forums and we'll look into it :)
  
 +
*Woody things
 +
** Wood: yes!  (be careful of fire)
 +
** Plywood: yes if it is "laser ply".  Normal plywood has non-laser compatible glue
 +
** MDF: no.  Clogs up our filters and smells bad.
 +
** LaserMDF: no.  It produces perhaps 50% the gunk of MDF but still too much.
 +
** Cork: yes, but it with a badly charred edge, and won't cut very deeply --- try cutting from the back of your sheet and using the cut to guide a craft knife / scalpel to make a neat cut through to the front.
  
'''turning off'''
+
*Plasticy things
 +
** Acrylic / Perspex: yes!
 +
** PVC/Vinyl: absolutely not.  Produces chlorine.
 +
** Silicone: we tried it with very limited success.  A mm or two perhaps, anything else chars and doesn't cut.
 +
** White Delrin/Acetal: yes with great care.  Make sure filters running well.  Don't open lid too quickly.  Check for fumes and fire.
 +
** Black Delrin/Acetal: no.  contains carbon black which can be toxic.
 +
** Teflon: no (it is toxic)
 +
** Nylon: no (consult an owner)
 +
** Polythene/polyethylene: no (consult an owner)
 +
** Lexan/Polycarbonate: no (consult an owner)
 +
** Polypropylene: yes just.  You must clean the bed.  It will cut up to about 2mm.  It's not a great quality cut, but just about doable.  Fire risk.
 +
** GPPS / Polystyrene / HIPS in thin solid sheet form:  maybe.  ask owner to help.  NO FOAM (it's highly flammable)
 +
** ABS: no (it's both toxic and messy - see [https://groups.google.com/g/cammakespace/c/M2Nr39bOeR8 : this thread])
  
 +
* Leathery things
 +
** Treated leather: no, because it releases formaldehyde (more details to follow)
 +
** bicast leather or pu leather (or bycast leather, or bi-cast leather): NO! It may contain vinyl, which is poisonous when cut with laser. See https://en.wikipedia.org/wiki/Bicast_leather.
 +
** Untreated leather: yes (more details to follow)
 +
** If unsure, don't cut it
  
The cutter is turned off using the key switch, check that air filtering system is also turned off. Shut down the PC and double check that everything is left in save state for the next user. Go away excited by what you can make and come back with lots more drawings!
+
*Papery things
 +
** Card/Paper: yes!  (be careful of fire)
 +
** Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)
 +
 
 +
*Metally things
 +
** Metal of any thickness doesn't cut. The surface can be engraved with a paint application.  LMM6000 Surmark/Thermark has been tested and is suggested for use, but expensive.  The owners suggest a speed of 800 and maximum power.
 +
 
 +
*Exotics
 +
** Fibre glass: no (unknown resin, glass particles)
 +
** Carbon Fibre: no
 +
** Slate: engravable for good effect
 +
 
 +
Very detailed cutting properties here: http://microfluidics.cnsi.ucsb.edu/tools/Trotec_laser_cutter/Synrad%20LaserProcessingGuide_Plastics.pdf
 +
== Fixing strange issues ==
 +
 
 +
* Etching doesn't work
 +
** Lines are not closed.  LaserCut usually warns you about this.  Ctrl-a to select all, then Tools->Unite Lines (0.001 should be fine).
 +
** Two copies on top of each other.  Copies on top of each other "cancel out" any etching.  Delete one copy.
 +
** Test with Menu->Laser->Simulate
 +
 
 +
* LaserCut will not download to the laser cutter
 +
** Check laser cutter isn't in a paused state
 +
** Restart LaserCut on the PC.  (We've not had any usb issues nor needed to restart the laser since upgrading the PC summer 2014).
 +
 
 +
* Laser cuts things out 2+ times
 +
** Check you don't have two copies loaded on top of each other
 +
** Check it's not set to cut multiple times in LaserCut (this setting is right of the Cut/Engrave/Speed/Power settings)
 +
** Check the laser front panel says "001" at the bottom.  If not, press right arrow until the number is highlighted, then down to adjust back to 1, then press return.
 +
 
 +
* Laser will only cut at the top right of the bed
 +
** Download again with Immediate Mode ticked
 +
** On laser panel, press return (I think?) then right twice (should select the bottom left option), then press return (I think).
 +
 
 +
*You Hit Emergency stop
 +
** E-M button needs twisting to re-activate
 +
** If that fails - check the circuit breaker inside.  From the back of the machine, you want to open the lower flap on the left side, which should be unlocked.  Near to the back, there is a breaker board.  Flip the flippy bit.
 +
 
 +
== Material Stock ==
 +
For the stock we hold, please see the  [[Equipment/Laser_Cutter_Stock|Laser cutter stock]] page.
 +
 
 +
== Owners ==
 +
 
 +
The Owners are those who have volunteered to be in charge of the laser cutter. This includes organising maintenance, providing the mandatory practical training, responding to technical issues and generally being a point of contact.
 +
 
 +
The '''current Owners''' of the Laser Cutter are:
 +
 
 +
* Alaric W - Maintenance
 +
*Adrian VDH - Maintenance
 +
*Woolf - Trainer
 +
 
 +
*Brian S - Trainer
 +
*Footleg - Trainer
 +
*Will  - Trainer
 +
*Lorna  - Trainer
 +
 
 +
If you have any questions, problems or concerns around the laser cutter Please fill out a trouble ticket on the PC, thanks.
 +
 
 +
For the old mailing list thread see here:
 +
* [https://groups.google.com/d/topic/cammakespace/Tmce2iKVzD8/discussion Log : Laser Cutter]
 +
 
 +
== Getting Training ==
 +
 
 +
Click here to get [https://web.makespace.org/training/ Makespace training] <br />
 +
 
 +
Practical sessions (2nd part of training) are advertised on '''http://meetup.makespace.org'''
  
 
== Health and Safety ==
 
== Health and Safety ==
  
The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training. Risks include:-
+
The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:
* Fire. Cutting at the wrong speed or the wrong power can result in the material igniting. You '''MUST''' watch the cutter at all times and be prepared to stop the job if problems occur. If you are seeing a little burning you can pause the job to see if the flame stops. You may find that the flaming occurs each time the laser passes over the slots in the bed. A CO2 fire extinguisher is located new the machine in case of emergency.
+
* '''ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS'''
* Laser burns. A 60W laser will do a good impression of Blofeld ('no Mr Bond I expect you to DIE'). Do not tamper with it. DO not tamper with any interlocks, Do not stare into the laser! As a sign in one university laser lab read 'these instructions continue in braille'
+
* '''NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED'''
* Entrapment. The head and bed of the cutter can be moved by the front panel menu. Be careful when working inside the cutting area not to trap hands or clothing. Do not attempt to climb into the machine!
+
* '''KNOW WHAT TO DO IF A FIRE BREAKS OUT'''
 +
* '''NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE'''
 +
 
 +
As a trained user, you should be very aware of the following risks and how to deal with them:
 +
 
 +
'''FIRE (under normal operation)''' - Cutting at the wrong speed or the wrong power can result in the material igniting
 +
* You must watch the cutter at all times and be prepared to abort the job if problems occur
 +
* Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
 +
* If a fire does take, this is the process you should follow (from minor to major):
 +
** Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
 +
** Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
 +
** Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
 +
** Use the workshop CO2 extinguisher to extinguish the flame
 +
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at
 +
 
 +
'''FIRE (abnormal operation)''' - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely
 +
* You must watch the cutter at all times and be prepared to abort the job if problems occur
 +
* If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
 +
** Hit the emergency stop
 +
** Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
 +
** Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
 +
* Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
 +
* You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at
 +
 
 +
'''FUMES''' - The laser cutting process will release different smoke and fumes depending on the material.
 +
* Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
 +
* Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.  
 +
* If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.
 +
 
 +
'''TRAPPING''' - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.  
 +
* Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.  
 +
* Always check the machine for unexpected items that may have fallen in before closing the lid.
 +
* Do not attempt to climb into the machine!
 +
 
 +
'''LASER BURNS/LIGHT''' - A 60W laser can do real damage.
 +
* The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
 +
* Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
 +
* Do not put metal in the laser cutter.
 +
 
 +
== Power and Speed Settings ==
 +
 
 +
In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:
 +
 
 +
<gallery>
 +
File:Laser-schmoo-3mm-acrylic.JPG|3mm Acrylic
 +
File:Laser-schmoo-10mm-acrylic.JPG|10mm Acrylic
 +
File:Laser-schmoo-9mm-mdf.JPG|9mm MDF (note: do not cut MDF - see above!)
 +
</gallery>
 +
 
 +
Settings to get you started:
 +
*3mm Acrylic:  Speed 12, Power 100, Corner power 100
 +
*5mm Acrylic:  Speed 6, Power 100, Corner power 100
 +
*Acrylic shallow cut:  Speed 30, power 50, corner power 50
 +
*Etching acrylic:  Speed 400, Power 50, Spacing 0.05
 +
 
 +
To make your own material test, a test grid can be downloaded here: [[Media:Test grid.zip]]
 +
 
 +
*3mm Delrin: Speed 10, Power 100, Corner power 100
 +
*5mm Delrin: Speed 4, Power 100, Corner power 100
 +
*6mm Delrin: speed 3, Power 100, Corner power 100
 +
 
 +
=== Test sheet ===
 +
 
 +
One member designed this test sheet: [[Media:Laser_cutter_test_sheet.pdf]]
 +
 
 +
The LaserCut software has too few colours for all the settings, so if you want to cut again, you need to assign settings by batches, e.g. by assigning all items to the colour black, turning off that colour ("Output" checkbox unchecked), and giving the squares one colour at a time with the right settings.
 +
 
 +
== Tips & Tricks ==
 +
 
 +
* If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
 +
* The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
 +
* If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
 +
* The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
 +
* If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, untick both options for type of export.  Choose mm as your unit.
 +
* There's now a page to help with Inkscape and our laser at [[Equipment/Laser_Cutter_Inkscape]]
 +
* If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.
 +
 
 +
=== Material Usage ===
 +
You want to use as little material as possible to save money, we want you to use as little material as possible to reduce re-stocking burden and wastage.
 +
There's a neat tool you can use for packing SVG files into small spaces, find it here: http://svgnest.com/
 +
 
 +
== Fixing up a job that went wrong ==
 +
 
 +
If you messed up a job and, for example, some cut lines weren't cut, you might try to run the job again after recolouring all of the lines except the ones that didn't cut.  You can then deselect those lines for output in the Cut/Engrave window on the top right of the Lasercut Interface, and this will keep your positioning.
 +
 
 +
If your head has moved, you can try setting some lines to power 1, which should not cut anything, but allows you to see where the head is travelling.
 +
 
 +
= Maintenance =
 +
 
 +
The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.
  
 
== Maintenance Schedule ==
 
== Maintenance Schedule ==
  
Every Job (done by all laser users)
+
Continuous Maintenance ('''Every job, done by all Laser Cutter Users''')
* Clean the laser bed with IPA and cloth
+
* Clean the laser bed with IPA and cloth or Swarfega wipes
 
* Clean any debris off laser bed and surround using soft brush
 
* Clean any debris off laser bed and surround using soft brush
  
Every Week (done by laser maintainers)
+
Basic Maintenance (Every week, done by Laser Cutter Maintainers)
 
* Clean the laser lens with IPA and cotton buds
 
* Clean the laser lens with IPA and cotton buds
 
* Oil the 3 runners with 3-in-one light oil  
 
* Oil the 3 runners with 3-in-one light oil  
Line 86: Line 285:
 
* Clean and remove debris from the machine base and catchment drawer
 
* Clean and remove debris from the machine base and catchment drawer
  
Every Month (done by laser maintainers)
+
Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)
 
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
 
* Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
 
* Check filter unit for filter renewal
 
* Check filter unit for filter renewal
 
* Oil the 4 rise and fall lead screws with 3-in-one light oil
 
* Oil the 4 rise and fall lead screws with 3-in-one light oil
 
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
 
* Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
* Work through mirror alignment procedure to check alignment of mirrors  
+
* Work through mirror alignment procedure to check alignment of mirrors
  
== Examples ==
+
== Repairs ==
  
Examples of laser jobs we've run (please add a photo of yours any time you do a job!)
+
We expect to have to change the following parts for general maintenance:
 +
* The laser tube (guess every 6-12 months)
 +
* The filter (guess every 3-6 months)
 +
* The optics (guess every 6-12 months)
  
<gallery>
+
Maintenance and Spares:
File:Laser-cut-focus-tool.JPG
+
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
File:Laser-cut-front-panels.JPG
+
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
File:Laser-cut-lizards.JPG
+
* Estimate for Call Out (£200.00)
File:Laser-cut-m-and-s.JPG
+
File:Laser-cut-model-building.JPG
+
File:Laser-cut-ply-m.JPG
+
</gallery>
+
  
== Shopping List ==
+
== Maintenance Shopping List ==
  
 
* 3-in-one light oil  
 
* 3-in-one light oil  
Line 115: Line 313:
 
* Hand held CO2 extinguisher
 
* Hand held CO2 extinguisher
  
== Information ==
+
= Further Information =
  
 
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
 
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=11 LS 6090 PRO Laser Product Page]
Line 121: Line 319:
 
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]
 
* [http://www.laserscript.co.uk/phpBB3/ Laserscript Forum]
  
== Purchase and Repairs ==
+
LaserCut 5.3
 +
* [http://www.leetro.com/english/sale/35.html Homepage]
 +
* [http://www.leetro.com/english/down/LaserCut5.3%20Manual%20V1.6.pdf Manual]
 +
 
 +
[[BitmapLaserEngraving]]
 +
 
 +
== Installation ==
 +
 
 +
<gallery>
 +
File:Laser_-_van.JPG
 +
File:Makespace-laser-install-02.JPG
 +
File:Laser_-_building_2.JPG
 +
File:Laser_-_building.JPG
 +
</gallery>
 +
 
 +
== Purchase ==
  
 
Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
 
Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)
Line 129: Line 342:
 
* Installation/Training (£175+vat)
 
* Installation/Training (£175+vat)
  
Maintenance and Spares:
+
Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=3 60 watt C02 laser tube] (£275.00+vat)
+
* [http://hpclaser.co.uk/index.php?main_page=product_info&cPath=2&products_id=12 50 mm Focus Meniscus Lens] (£75.00+vat)
+
* Estimate for Call Out (£200.00)
+
 
+
Whilst tube lifetime is impacted a lot by usage and care, we will initially estimate the need to replace the laser tube every 6 months
+
 
+
== Install ==
+
  
[[File:Makespace-laser-install-02.JPG|thumb]]
+
<gallery>
 
+
File:Laser-cut-focus-tool.JPG
 
+
File:Laser-cut-front-panels.JPG
== Questions and Potential Requirements ==
+
File:Laser-cut-lizards.JPG
* Cambridge Science Centre
+
File:Laser-cut-m-and-s.JPG
** 600 x 900mm would allow use for exhibit units
+
File:Laser-cut-model-building.JPG
* Thickness of materials?
+
File:Laser-cut-ply-m.JPG
** 25mm acrylic, 10-12mm ply (depending on ply)
+
File:Laser_output_-_makespace_arrow.JPG
* Do we need a cooler unit?
+
File:Laser_box.jpg
** No. More needed for continuous use (we expect regular but intermittent use)
+
File:Croc-small.jpg
* What are the power supply requirements?
+
File:LaserCutter_Jobs_1.jpg
** 240 V 50hz
+
File:LaserCutterGallery_20130328.jpg
--[[User:Cannon Fodder|Brian Corteil]] 00:45, 3 January 2013 (UTC) How much power does the laser and the fume filter, require?
+
File:LasercutSettlers.jpg
 
+
File:Wolfstock1.jpg
I have looked on their website and it's not clear, I also had a looked on the Bofa Website for information about the fume filter, and there are too many models to be able select the correct model. When you next contact the supplier. Can you ask the following.
+
File:Mug-holder.jpg
 
+
File:2013-10-21 20.10.06.jpg
What size supply will each item require?
+
File:Indy jigster.png
 
+
</gallery>
I did read somewhere on the site, that the laser and the fume filter would be interlocked, is this correct? If so, this would suggest that only single supply would be required for both items.
+
and one more question,
+
 
+
does the laser need a assigned PC?
+
 
+
* [User:Barhamd] I'm wanting to cut thin 1mm and .5mm ABS or perspex for model buildings. Would like something that can cut and half-cut a fine ~.25mm line. Not so concerned about massive size. Is this some kind of work something that could be done on a large cutter or do we need a smaller unit too?
+
** It states "Resetting position accuracy: 0.015mm"
+
* How often do the lasers need replacing?
+
** It depends on lots of things like care, use level, how much degradation is acceptable, luck - "could be 1 year or 5 years"; we will assume every year for now
+
* What (if anything) can this do on metals?
+
* What sort of line thickness does it give?
+
 
+
The bare minimum for me would be something capable of cutting an A3 sheet, which probably means 600x450mm. A 1200x900mm[1] machine from Laserscript comes in at about £6.5K; a used one went on eBay recently for something like £4.5K.  The factory gate price for a similar unit from Shenhui, who are a well-regarded Chinese manufacturer, is $4K -sea-freight would come in at $250, and import duty appears to be 4.5%.
+
 
+
I (Dave from the science centre) would be really keen to be able to cut at least A1 on it (840x594mm) As this is the biggest module we are using at the moment.
+
 
+
== Laser cutters used by other spaces, and other references ==
+
 
+
{| class="wikitable"
+
|-
+
! Model !! Owner !! Cost !! Bed size !! URL
+
|-
+
| HPC LS3060 || London Hackspace || 3250 || 290x570 || http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=39
+
|-
+
| HPC LS3020 || Nottinghack || 1125 || 300x210 || http://hpclaser.co.uk/index.php?main_page=product_info&cPath=1&products_id=40
+
|-
+
| Epilog Mini 24 40W || FabLab Manchester || (Estimated) 11450 || 300x600 || http://www.epiloglaser.co.uk/legend_mini24.htm
+
|}
+
 
+
For comparison, a 1200x900 laser cutter from Shenhui (who appear to be the internet's Chinese supplier of choice) comes in at US$4000 + US$250 seafreight + 4.5% import duty + delivery (or collection) from Felixstowe - that's roughly £2775 ex VAT.
+
 
+
Replacement tubes cost £195 ex VAT for a 40W HPC tube (LS3020/LS3060) and £350 ex VAT for an 80W (LS1290). They are rated at 1000 hours, although this is heavily dependent on careful calibration of the machine and will be much lower if it's misconfigured.
+

Latest revision as of 16:36, 20 February 2022

Class Red equipment: Do not use without specific training.
(More about equipment classes)

Equipment / Laser Cutter

Introduction

The laser cutters are a great way to easily produce accurate and complex 2D forms in various materials, and can be designed for with limited experience in various drawing or CAD applications. At the same time, it is an expensive tool with real risk of injury and fire, so is very important you know how to use it to avoid damaging yourself and the machine. 

You must only use the laser cutter if you have had the Makespace training, and if you are ever in any doubt about something, please ask for assistance.

We have two 60w CO2 Water Cooled Laser Cutters. Each has a working area of 900mm by 600mm. You can engrave and cut through materials such as wood, plastic, card, leather, fabrics, up to about 10-15mm thick (note, it can not cut metal). The laser cut is approximately 0.15mm wide, and a job can take a few seconds through to tens of minutes depending on material thickness and design complexity.

We have dedicated PCs running LaserCut 5.3 software to import, prepare and download jobs to the Laser Cutter. It can import various formats, with DXF being the most commonly used, so various software packages can be used to create your designs.

Instructions

These instructions are not a substitute for this training, you must have completed the Makespace Laser Cutter Training and have had your name added to the trained user list.

[Laser Cutter Software Instructions from the classroom

Power Up

Give the machine a quick visual check. Make sure that there is nothing left on the bed, the water reservoir of the chiller looks normal, and that the equipment has no obvious damage or signs of being out-of-action. If the bed looks like it has residue on it, give it a wipe with IPA and a cloth. Before doing any job, the laser should be left to warm up for 4-5 mins. While the machine warms up, power on the adjacent PC and start the LaserCut application from the desktop. During this time the water temperature shown on the chiller should drop from ambient temperature to the usual setting of 18C.

Load your Design

The PC software has an import facility (file > import) which seems to be happy taking AutoCAD 2004 DXF files and other formats. The workspace of the laser bed is represented as the work area in the LaserCut software. If the import doesn't do what you want size-wise, you can select the whole image and then use the 'size' command from the drop down menu to set the dimension you want. Clicking on the three dots ... symbol will adjust the other axis in the same proportion (keeping the aspect ratio fixed). Selecting the 'centre on bed' option will locate your imported drawing on the centre of the machine's cutting bed.
The PC's now each have a PIN, which you can find on stickers the desk under the keyboard and on the wall near the top right of the computer screen.

Prep

Select all (mouse-drag around all, or ctrl-a) and Tools -> Unite Lines. You always want to do this. Without it, many things won't work (will take longer, you'll get gaps, it won't do inner-before-outer, etching areas won't work, etc).

Make sure all your design fits within the bed. Even in immediate (relative) mode, you still need to do this.

LaserCut 5.3 tips
If you're stuck in "draw a box" mode, etc. you can right click and hit "pick" to get your pointer back

Assign Settings to Colours

Each part of your drawing that is assigned a different colour can have a different cut action assigned. Each colour will appear on the menu on the right hand side of the screen with numbers related to power and speed of the laser which will be used for the colour.

The main options are to Cut (line) or Engrave (raster fill). A marking on the material is a Cut. For each material and cutting depth required, a corresponding speed and power must be entered. The handbook provided with the machine gives suggested values for various materials but these should be considered as a starting point for a test. See the Power and Speed Settings section for our guidelines and experiences for these settings.

Parts are cut "inside out" within a colour, so if you have a hole cutout in a small piece you don't need to give this a separate colour.

Download to the Cutter

Your drawing will feature a blue dot which represents the starting point of the laser; this is by default on the top right corner (can be changed in the menu). In general, you will want to use "immediate" mode, which means this point represents wherever the laser is positioned when you start the job. You can also run the job in absolute mode by unchecking the box, making the job use absolute positioning on the workspace.

To download, select Download and Download Current; the download option will by default call the file on the laser cutter 'LASER'.

Set the Focus

Before each job, the focus needs to be checked and set by adjusting the height of the bed, and thus the work piece, from the lens. The critical dimension here is 41mm and several gauges made of perspex will be left around the machine. This gauge needs to be a fit between the top surface of the material you intend to cut and the white plastic 'flap' on the lens piece. The height of the table is adjusted using the UP and DOWN buttons. Failure to set the distance correctly will result in an out of focus laser and much bigger (but lower powered) cut line. Always ensure there is clearance between the material and laser head before the head moves.

Aligning and Testing the Job

The cutter's menu will show the most recent downloaded file highlighted. Pressing the 'test' button will make the head travel along the square maximum extends of the cuts. This shows you that you have the material in the right place, and you have enough of it! You can do this repeatedly, moving the work piece by hand or the laser head using the arrow keys (after hitting ESC), until you are confident you have things where you want them.

Cut the Job

When happy with the location of the material, close the lid and press 'start' to start the cutter. Watch the head and at least at first be prepared to press the 'stop' button immediately if you find you are burning massive holes in your work piece! This goes back to doing some tests on a sample of your material and making sure you are happy with the cut speeds and power you have selected. You should stay near the cutter at all times and be prepared to pause it or stop it in the event of fire.

DO NOT EVER LEAVE THE CUTTER UNATTENDED

Finishing

The end of the job is signified by a beep. Waiting a few moments for the exhaust pump to clear any remaining smoke is a good idea, especially with wood, and will limit the build up of smells in the rest of the workshop. Remove your work piece, ensuring that all parts are cleared from the bed of the machine.

Power Down

The cutter is turned off using your fob.

Clean the bed of debris using the soft brush, then wipe down the bed using IPA and a cloth.

If you have been cutting particularly 'dirty' materials, most notably Ply which leaves a sticky residue then you will need WonderWipes and lots of 'elbow grease'. Residue on the bed can impact the next persons' job so please make the effort to clean up and leave the cutter as you would wish to find it.

Go away excited by what you can make and come back with lots more drawings!

Can I cut it?

If it's not on this list, the answer is "NO YOU CAN'T CUT IT AT MAKESPACE". Even if other people say it's ok. Bear in mind that we can't ventilate externally like other people can.

If it's something that isn't covered here, do ask on the forums and we'll look into it :)

  • Woody things
    • Wood: yes! (be careful of fire)
    • Plywood: yes if it is "laser ply". Normal plywood has non-laser compatible glue
    • MDF: no. Clogs up our filters and smells bad.
    • LaserMDF: no. It produces perhaps 50% the gunk of MDF but still too much.
    • Cork: yes, but it with a badly charred edge, and won't cut very deeply --- try cutting from the back of your sheet and using the cut to guide a craft knife / scalpel to make a neat cut through to the front.
  • Plasticy things
    • Acrylic / Perspex: yes!
    • PVC/Vinyl: absolutely not. Produces chlorine.
    • Silicone: we tried it with very limited success. A mm or two perhaps, anything else chars and doesn't cut.
    • White Delrin/Acetal: yes with great care. Make sure filters running well. Don't open lid too quickly. Check for fumes and fire.
    • Black Delrin/Acetal: no. contains carbon black which can be toxic.
    • Teflon: no (it is toxic)
    • Nylon: no (consult an owner)
    • Polythene/polyethylene: no (consult an owner)
    • Lexan/Polycarbonate: no (consult an owner)
    • Polypropylene: yes just. You must clean the bed. It will cut up to about 2mm. It's not a great quality cut, but just about doable. Fire risk.
    • GPPS / Polystyrene / HIPS in thin solid sheet form: maybe. ask owner to help. NO FOAM (it's highly flammable)
    • ABS: no (it's both toxic and messy - see : this thread)
  • Leathery things
    • Treated leather: no, because it releases formaldehyde (more details to follow)
    • bicast leather or pu leather (or bycast leather, or bi-cast leather): NO! It may contain vinyl, which is poisonous when cut with laser. See https://en.wikipedia.org/wiki/Bicast_leather.
    • Untreated leather: yes (more details to follow)
    • If unsure, don't cut it
  • Papery things
    • Card/Paper: yes! (be careful of fire)
    • Tissue: yes if super super really careful (be REALLY careful of fire, have emergency procedure in place before you start)
  • Metally things
    • Metal of any thickness doesn't cut. The surface can be engraved with a paint application. LMM6000 Surmark/Thermark has been tested and is suggested for use, but expensive. The owners suggest a speed of 800 and maximum power.
  • Exotics
    • Fibre glass: no (unknown resin, glass particles)
    • Carbon Fibre: no
    • Slate: engravable for good effect

Very detailed cutting properties here: http://microfluidics.cnsi.ucsb.edu/tools/Trotec_laser_cutter/Synrad%20LaserProcessingGuide_Plastics.pdf

Fixing strange issues

  • Etching doesn't work
    • Lines are not closed. LaserCut usually warns you about this. Ctrl-a to select all, then Tools->Unite Lines (0.001 should be fine).
    • Two copies on top of each other. Copies on top of each other "cancel out" any etching. Delete one copy.
    • Test with Menu->Laser->Simulate
  • LaserCut will not download to the laser cutter
    • Check laser cutter isn't in a paused state
    • Restart LaserCut on the PC. (We've not had any usb issues nor needed to restart the laser since upgrading the PC summer 2014).
  • Laser cuts things out 2+ times
    • Check you don't have two copies loaded on top of each other
    • Check it's not set to cut multiple times in LaserCut (this setting is right of the Cut/Engrave/Speed/Power settings)
    • Check the laser front panel says "001" at the bottom. If not, press right arrow until the number is highlighted, then down to adjust back to 1, then press return.
  • Laser will only cut at the top right of the bed
    • Download again with Immediate Mode ticked
    • On laser panel, press return (I think?) then right twice (should select the bottom left option), then press return (I think).
  • You Hit Emergency stop
    • E-M button needs twisting to re-activate
    • If that fails - check the circuit breaker inside. From the back of the machine, you want to open the lower flap on the left side, which should be unlocked. Near to the back, there is a breaker board. Flip the flippy bit.

Material Stock

For the stock we hold, please see the Laser cutter stock page.

Owners

The Owners are those who have volunteered to be in charge of the laser cutter. This includes organising maintenance, providing the mandatory practical training, responding to technical issues and generally being a point of contact.

The current Owners of the Laser Cutter are:

  • Alaric W - Maintenance
  • Adrian VDH - Maintenance
  • Woolf - Trainer
  • Brian S - Trainer
  • Footleg - Trainer
  • Will - Trainer
  • Lorna - Trainer

If you have any questions, problems or concerns around the laser cutter Please fill out a trouble ticket on the PC, thanks.

For the old mailing list thread see here:

Getting Training

Click here to get Makespace training

Practical sessions (2nd part of training) are advertised on http://meetup.makespace.org

Health and Safety

The laser cutter is a potentially dangerous piece of equipment which must only be operated by members who have received appropriate training and who take due care. The top things to always remember when using the laser cutter are:

  • ONLY USE THE LASER CUTTER IF YOU ARE ON THE LIST OF TRAINED USERS
  • NEVER LEAVE THE LASER CUTTER RUNNING UNATTENDED
  • KNOW WHAT TO DO IF A FIRE BREAKS OUT
  • NEVER CUT MATERIALS THAT YOU DON'T KNOW ARE SAFE

As a trained user, you should be very aware of the following risks and how to deal with them:

FIRE (under normal operation) - Cutting at the wrong speed or the wrong power can result in the material igniting

  • You must watch the cutter at all times and be prepared to abort the job if problems occur
  • Small flashes of flame that don't hang around for a fraction of a second are acceptable, but any more is rare and not acceptable
  • If a fire does take, this is the process you should follow (from minor to major):
    • Press "pause" (the same button you started the job with) - This will turn the laser off so no more heat enters, and assuming the flame goes out, you can press "start" for the job to continue where it left off
    • Open the lid - With the job paused, you can open the lid to blow out the flame. Again, it is possible to re-close the lid and continue where you left off
    • Move the material from under the laser head assuming safe to do so (so it doesn't damage the optics; alternatively send the laser to home/datum), and smother with a spare sheet of material or blow out
    • Use the workshop CO2 extinguisher to extinguish the flame
  • You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

FIRE (abnormal operation) - If the head gets stuck or something else goes wrong, ignition could happen much more suddenly or intensely

  • You must watch the cutter at all times and be prepared to abort the job if problems occur
  • If the head gets trapped (e.g. tomb-stoning of a piece, mechanical failure) or any other problem occurs that causes or could cause fire, this is the process you should follow:
    • Hit the emergency stop
    • Open the lid and move the material from under the laser head assuming safe to do so (so it doesn't damage the optics)
    • Blow out, smother with a spare sheet of material, or use the CO2 extinguisher to extinguish the flame as appropriate
  • Ensure a Maintainer looks at the machine before it is brought back in to action if it is not obvious what went wrong and all is ok
  • You should also make a note in the log if any of this happens with associated materials and settings so we can keep track of any particular materials/settings we should look at

FUMES - The laser cutting process will release different smoke and fumes depending on the material.

  • Never cut PVC or a material you are not sure is safe. When PVC is heated it releases chlorine gas, this mixes with the moisture in the air and the result is hydrochloric acid which is toxic to humans and corrosive to machines.
  • Ensure the filter is on and the cutter lid stays closed for a while after a job to allow the fumes to clear.
  • If you are feeling strange, think the fume build up is too much, or for any other reason you are unsure, stop the job.

TRAPPING - The head and bed of the cutter can be moved by the front panel menu or programs in the machines memory.

  • Be careful when working inside the cutting area or with the lid open not to trap hands, hair, clothing or anything else.
  • Always check the machine for unexpected items that may have fallen in before closing the lid.
  • Do not attempt to climb into the machine!

LASER BURNS/LIGHT - A 60W laser can do real damage.

  • The laser should be safe within the confines of the machine, and cut-off automatically when the lid is open (although this should not be relied upon). The top window is safe to look through during a job, but do not attempt to interfere with these windows or the laser or in any way invent some way to look at the laser.
  • Do not tamper with the laser cutter, or any interlocks. All side panels of the laser should always be closed and locked whilst the machine is plugged in.
  • Do not put metal in the laser cutter.

Power and Speed Settings

In due time we will try to build up a large sample stock of materials and record the values which work best. Here are the sample material tests we have so far:

Settings to get you started:

  • 3mm Acrylic: Speed 12, Power 100, Corner power 100
  • 5mm Acrylic: Speed 6, Power 100, Corner power 100
  • Acrylic shallow cut: Speed 30, power 50, corner power 50
  • Etching acrylic: Speed 400, Power 50, Spacing 0.05

To make your own material test, a test grid can be downloaded here: Media:Test grid.zip

  • 3mm Delrin: Speed 10, Power 100, Corner power 100
  • 5mm Delrin: Speed 4, Power 100, Corner power 100
  • 6mm Delrin: speed 3, Power 100, Corner power 100

Test sheet

One member designed this test sheet: Media:Laser_cutter_test_sheet.pdf

The LaserCut software has too few colours for all the settings, so if you want to cut again, you need to assign settings by batches, e.g. by assigning all items to the colour black, turning off that colour ("Output" checkbox unchecked), and giving the squares one colour at a time with the right settings.

Tips & Tricks

  • If the laser cutter's user interface does not seem to respond/do what you want, hit "ESC" to return to 'normal mode'.
  • The opaque white acrylic needs slightly stronger settings for surface cuts as they are not as visible as in the transparent acrylic (i.e., for similar effect you need a deeper cut). Otherwise seems to cut equivalently to transparent acrylics.
  • If you want a tight fit of pieces or very accurate sizing, keep in mind that the laser beam has a width of just over 0.1 mm (maybe 0.11 or 0.12 mm). So all exterior cut lines should be offset by 0.05 mm; you can do this very easily in the LaserCutter Software with the "Offset" tool (units are in mm, so enter '0.05' and select 'Outer').
  • The DXF file format stores values only (not values and units). The internal units in the LaserCutter are in mm. If you set your document's units to mm in the exporting CAD system it should work fine, but generally it is a good idea to have a piece of geometry of known length, e.g. a line 100mm long, or a box of known size around your design. This makes adjusting the scaling a lot easier.
  • If you want to export a DXF from Inkscape (which is a great, free vector drawing package), then make sure you do "Object to path" from the Path menu for the whole object and then during the export stage, untick both options for type of export. Choose mm as your unit.
  • There's now a page to help with Inkscape and our laser at Equipment/Laser_Cutter_Inkscape
  • If the jog buttons (arrow keys moving the laser head around) are only moving the head in small single steps rather than moving it continuously, make sure that the jog step size is set to 0.0mm in the Jog Settings section of the menu.

Material Usage

You want to use as little material as possible to save money, we want you to use as little material as possible to reduce re-stocking burden and wastage. There's a neat tool you can use for packing SVG files into small spaces, find it here: http://svgnest.com/

Fixing up a job that went wrong

If you messed up a job and, for example, some cut lines weren't cut, you might try to run the job again after recolouring all of the lines except the ones that didn't cut. You can then deselect those lines for output in the Cut/Engrave window on the top right of the Lasercut Interface, and this will keep your positioning.

If your head has moved, you can try setting some lines to power 1, which should not cut anything, but allows you to see where the head is travelling.

Maintenance

The maintenance of the Laser Cutter is carried out by the Owners, with some basic maintenance being carried out by Users on every job.

Maintenance Schedule

Continuous Maintenance (Every job, done by all Laser Cutter Users)

  • Clean the laser bed with IPA and cloth or Swarfega wipes
  • Clean any debris off laser bed and surround using soft brush

Basic Maintenance (Every week, done by Laser Cutter Maintainers)

  • Clean the laser lens with IPA and cotton buds
  • Oil the 3 runners with 3-in-one light oil
  • Thoroughly clean the laser bed with IPA and cloth
  • Check the water level in the cooling tank
  • Clean and remove debris from the machine base and catchment drawer

Full Maintenance (Every 4 weeks, done by Laser Cutter Maintainers)

  • Check the water is clean in the cooling tank (i.e. no contamination/organic build up)
  • Check filter unit for filter renewal
  • Oil the 4 rise and fall lead screws with 3-in-one light oil
  • Check mirrors and clean with a disposable sachet lens cleaner cloth (only if needed, mirror coatings are delicate)
  • Work through mirror alignment procedure to check alignment of mirrors

Repairs

We expect to have to change the following parts for general maintenance:

  • The laser tube (guess every 6-12 months)
  • The filter (guess every 3-6 months)
  • The optics (guess every 6-12 months)

Maintenance and Spares:

Maintenance Shopping List

  • 3-in-one light oil
  • Cotton Buds
  • Lens cleaner sachets
  • Soft paint/cleaning brush
  • Thermometer for water tank
  • Hand held CO2 extinguisher

Further Information

LaserCut 5.3

BitmapLaserEngraving

Installation

Purchase

Full Purchase, Delivery and Installation (£6865.00+vat = £8238.00)

Here are some examples of laser jobs we've run (please add a photo of yours any time you do a job!)